QMGR(8)                                                                QMGR(8)

NAME
       qmgr - Postfix queue manager

SYNOPSIS
       qmgr [generic Postfix daemon options]

DESCRIPTION
       The qmgr(8) daemon awaits the arrival of incoming mail and arranges for
       its delivery via Postfix delivery processes.  The actual  mail  routing
       strategy  is  delegated to the trivial-rewrite(8) daemon.  This program
       expects to be run from the master(8) process manager.

       Mail addressed to the local double-bounce address is  logged  and  dis-
       carded.   This  stops  potential  loops  caused by undeliverable bounce
       notifications.

MAIL QUEUES
       The qmgr(8) daemon maintains the following queues:

       incoming
              Inbound mail from the network, or mail picked up  by  the  local
              pickup(8) daemon from the maildrop directory.

       active Messages  that the queue manager has opened for delivery. Only a
              limited number of messages is allowed to enter the active  queue
              (leaky bucket strategy, for a fixed delivery rate).

       deferred
              Mail  that  could  not  be delivered upon the first attempt. The
              queue manager implements exponential  backoff  by  doubling  the
              time between delivery attempts.

       corrupt
              Unreadable or damaged queue files are moved here for inspection.

       hold   Messages that are kept "on hold" are  kept  here  until  someone
              sets them free.

DELIVERY STATUS REPORTS
       The  qmgr(8) daemon keeps an eye on per-message delivery status reports
       in the following directories. Each status report file has the same name
       as the corresponding message file:

       bounce Per-recipient  status  information  about  why  mail is bounced.
              These files are maintained by the bounce(8) daemon.

       defer  Per-recipient status information  about  why  mail  is  delayed.
              These files are maintained by the defer(8) daemon.

       trace  Per-recipient  status  information as requested with the Postfix
              "sendmail -v" or "sendmail -bv" command.  These files are  main-
              tained by the trace(8) daemon.

       The qmgr(8) daemon is responsible for asking the bounce(8), defer(8) or
       trace(8) daemons to send delivery reports.

STRATEGIES
       The queue manager implements a variety of strategies for either opening
       queue files (input) or for message delivery (output).

       leaky bucket
              This  strategy limits the number of messages in the active queue
              and prevents the queue manager from running out of memory  under
              heavy load.

       fairness
              When the active queue has room, the queue manager takes one mes-
              sage from the incoming queue and one from  the  deferred  queue.
              This prevents a large mail backlog from blocking the delivery of
              new mail.

       slow start
              This strategy eliminates "thundering herd"  problems  by  slowly
              adjusting the number of parallel deliveries to the same destina-
              tion.

       round robin
              The  queue  manager  sorts  delivery  requests  by  destination.
              Round-robin  selection  prevents one destination from dominating
              deliveries to other destinations.

       exponential backoff
              Mail  that  cannot  be  delivered  upon  the  first  attempt  is
              deferred.   The  time interval between delivery attempts is dou-
              bled after each attempt.

       destination status cache
              The queue manager avoids unnecessary delivery attempts by  main-
              taining  a  short-term,  in-memory  list of unreachable destina-
              tions.

       preemptive message scheduling
              The queue manager attempts to minimize the average per-recipient
              delay  while  still  preserving  the correct per-message delays,
              using a sophisticated preemptive message scheduling.

TRIGGERS
       On an idle system, the queue manager waits for the arrival  of  trigger
       events, or it waits for a timer to go off. A trigger is a one-byte mes-
       sage.  Depending on the message received, the  queue  manager  performs
       one  of  the following actions (the message is followed by the symbolic
       constant used internally by the software):

       D (QMGR_REQ_SCAN_DEFERRED)
              Start a deferred queue  scan.   If  a  deferred  queue  scan  is
              already  in  progress, that scan will be restarted as soon as it
              finishes.

       I (QMGR_REQ_SCAN_INCOMING)
              Start an incoming queue scan.  If  an  incoming  queue  scan  is
              already  in  progress, that scan will be restarted as soon as it
              finishes.

       A (QMGR_REQ_SCAN_ALL)
              Ignore deferred queue file time stamps. The request affects  the
              next deferred queue scan.

       F (QMGR_REQ_FLUSH_DEAD)
              Purge all information about dead transports and destinations.

       W (TRIGGER_REQ_WAKEUP)
              Wakeup  call,  This  is used by the master server to instantiate
              servers that should not go away forever. The action is to  start
              an incoming queue scan.

       The  qmgr(8) daemon reads an entire buffer worth of triggers.  Multiple
       identical trigger requests are collapsed into one, and trigger requests
       are  sorted  so that A and F precede D and I. Thus, in order to force a
       deferred queue run, one would request A F D; in  order  to  notify  the
       queue manager of the arrival of new mail one would request I.

STANDARDS
       RFC 3463 (Enhanced status codes)
       RFC 3464 (Delivery status notifications)

SECURITY
       The qmgr(8) daemon is not security sensitive. It reads single-character
       messages from untrusted local users, and thus  may  be  susceptible  to
       denial of service attacks. The qmgr(8) daemon does not talk to the out-
       side world, and it can be run at fixed  low  privilege  in  a  chrooted
       environment.

DIAGNOSTICS
       Problems  and  transactions  are  logged  to syslogd(8) or postlogd(8).
       Corrupted message files are saved to  the  corrupt  queue  for  further
       inspection.

       Depending  on the setting of the notify_classes parameter, the postmas-
       ter is notified of bounces and of other trouble.

BUGS
       A single queue manager process has to compete for disk access with mul-
       tiple front-end processes such as cleanup(8). A sudden burst of inbound
       mail can negatively impact outbound delivery rates.

CONFIGURATION PARAMETERS
       Changes to main.cf are not picked up automatically as qmgr(8) is a per-
       sistent process. Use the "postfix reload" command after a configuration
       change.

       The text below provides only a parameter summary. See  postconf(5)  for
       more details including examples.

       In the text below, transport is the first field in a master.cf entry.

COMPATIBILITY CONTROLS
       Available before Postfix version 2.5:

       allow_min_user (no)
              Allow  a  sender  or  recipient address to have `-' as the first
              character.

       Available with Postfix version 2.7 and later:

       default_filter_nexthop (empty)
              When a content_filter or FILTER request  specifies  no  explicit
              next-hop  destination, use $default_filter_nexthop instead; when
              that value is empty, use the domain in the recipient address.

ACTIVE QUEUE CONTROLS
       qmgr_clog_warn_time (300s)
              The minimal delay between warnings that a  specific  destination
              is clogging up the Postfix active queue.

       qmgr_message_active_limit (20000)
              The maximal number of messages in the active queue.

       qmgr_message_recipient_limit (20000)
              The  maximal  number of recipients held in memory by the Postfix
              queue manager, and the maximal size of the short-term, in-memory
              "dead" destination status cache.

       qmgr_message_recipient_minimum (10)
              The minimal number of in-memory recipients for any message.

       default_recipient_limit (20000)
              The default per-transport upper limit on the number of in-memory
              recipients.

       transport_recipient_limit ($default_recipient_limit)
              A transport-specific override  for  the  default_recipient_limit
              parameter  value,  where  transport is the master.cf name of the
              message delivery transport.

       default_extra_recipient_limit (1000)
              The default value for the extra per-transport limit  imposed  on
              the number of in-memory recipients.

       transport_extra_recipient_limit ($default_extra_recipient_limit)
              A  transport-specific  override  for  the  default_extra_recipi-
              ent_limit parameter value, where transport is the master.cf name
              of the message delivery transport.

       Available in Postfix version 2.4 and later:

       default_recipient_refill_limit (100)
              The  default  per-transport  limit  on  the number of recipients
              refilled at once.

       transport_recipient_refill_limit ($default_recipient_refill_limit)
              A   transport-specific   override   for   the    default_recipi-
              ent_refill_limit  parameter  value,  where transport is the mas-
              ter.cf name of the message delivery transport.

       default_recipient_refill_delay (5s)
              The default per-transport maximum delay between refilling recip-
              ients.

       transport_recipient_refill_delay ($default_recipient_refill_delay)
              A    transport-specific   override   for   the   default_recipi-
              ent_refill_delay parameter value, where transport  is  the  mas-
              ter.cf name of the message delivery transport.

DELIVERY CONCURRENCY CONTROLS
       initial_destination_concurrency (5)
              The  initial  per-destination  concurrency  level  for  parallel
              delivery to the same destination.

       default_destination_concurrency_limit (20)
              The default maximal number of parallel deliveries  to  the  same
              destination.

       transport_destination_concurrency_limit   ($default_destination_concur-
       rency_limit)
              A  transport-specific  override for the default_destination_con-
              currency_limit parameter value, where transport is the master.cf
              name of the message delivery transport.

       Available in Postfix version 2.5 and later:

       transport_initial_destination_concurrency ($initial_destination_concur-
       rency)
              A  transport-specific  override for the initial_destination_con-
              currency parameter value, where transport is the master.cf  name
              of the message delivery transport.

       default_destination_concurrency_failed_cohort_limit (1)
              How  many  pseudo-cohorts  must  suffer  connection or handshake
              failure before a specific destination is considered  unavailable
              (and further delivery is suspended).

       transport_destination_concurrency_failed_cohort_limit  ($default_desti-
       nation_concurrency_failed_cohort_limit)
              A  transport-specific  override for the default_destination_con-
              currency_failed_cohort_limit parameter value, where transport is
              the master.cf name of the message delivery transport.

       default_destination_concurrency_negative_feedback (1)
              The  per-destination  amount  of  delivery  concurrency negative
              feedback, after a delivery completes with a connection or  hand-
              shake failure.

       transport_destination_concurrency_negative_feedback  ($default_destina-
       tion_concurrency_negative_feedback)
              A  transport-specific  override for the default_destination_con-
              currency_negative_feedback parameter value, where  transport  is
              the master.cf name of the message delivery transport.

       default_destination_concurrency_positive_feedback (1)
              The  per-destination  amount  of  delivery  concurrency positive
              feedback, after a delivery completes without connection or hand-
              shake failure.

       transport_destination_concurrency_positive_feedback  ($default_destina-
       tion_concurrency_positive_feedback)
              A  transport-specific  override for the default_destination_con-
              currency_positive_feedback parameter value, where  transport  is
              the master.cf name of the message delivery transport.

       destination_concurrency_feedback_debug (no)
              Make  the queue manager's feedback algorithm verbose for perfor-
              mance analysis purposes.

RECIPIENT SCHEDULING CONTROLS
       default_destination_recipient_limit (50)
              The default maximal number of recipients per message delivery.

       transport_destination_recipient_limit     ($default_destination_recipi-
       ent_limit)
              A transport-specific override for the default_destination_recip-
              ient_limit  parameter  value,  where  transport is the master.cf
              name of the message delivery transport.

MESSAGE SCHEDULING CONTROLS
       default_delivery_slot_cost (5)
              How often the Postfix queue manager's scheduler  is  allowed  to
              preempt delivery of one message with another.

       transport_delivery_slot_cost ($default_delivery_slot_cost)
              A transport-specific override for the default_delivery_slot_cost
              parameter value, where transport is the master.cf  name  of  the
              message delivery transport.

       default_minimum_delivery_slots (3)
              How  many  recipients a message must have in order to invoke the
              Postfix queue manager's scheduling algorithm at all.

       transport_minimum_delivery_slots ($default_minimum_delivery_slots)
              A transport-specific  override  for  the  default_minimum_deliv-
              ery_slots parameter value, where transport is the master.cf name
              of the message delivery transport.

       default_delivery_slot_discount (50)
              The default value for transport-specific _delivery_slot_discount
              settings.

       transport_delivery_slot_discount ($default_delivery_slot_discount)
              A transport-specific override for the default_delivery_slot_dis-
              count parameter value, where transport is the master.cf name  of
              the message delivery transport.

       default_delivery_slot_loan (3)
              The  default  value  for  transport-specific _delivery_slot_loan
              settings.

       transport_delivery_slot_loan ($default_delivery_slot_loan)
              A transport-specific override for the default_delivery_slot_loan
              parameter  value,  where  transport is the master.cf name of the
              message delivery transport.

OTHER RESOURCE AND RATE CONTROLS
       minimal_backoff_time (300s)
              The minimal time between attempts to deliver a deferred message;
              prior to Postfix 2.4 the default value was 1000s.

       maximal_backoff_time (4000s)
              The maximal time between attempts to deliver a deferred message.

       maximal_queue_lifetime (5d)
              Consider a message as undeliverable, when delivery fails with  a
              temporary error, and the time in the queue has reached the maxi-
              mal_queue_lifetime limit.

       queue_run_delay (300s)
              The time between deferred queue  scans  by  the  queue  manager;
              prior to Postfix 2.4 the default value was 1000s.

       transport_retry_time (60s)
              The  time  between attempts by the Postfix queue manager to con-
              tact a malfunctioning message delivery transport.

       Available in Postfix version 2.1 and later:

       bounce_queue_lifetime (5d)
              Consider a bounce message as undeliverable, when delivery  fails
              with  a  temporary  error, and the time in the queue has reached
              the bounce_queue_lifetime limit.

       Available in Postfix version 2.5 and later:

       default_destination_rate_delay (0s)
              The default amount of delay that is inserted between  individual
              message  deliveries  to  the  same destination and over the same
              message delivery transport.

       transport_destination_rate_delay ($default_destination_rate_delay)
              A   transport-specific   override   for   the   default_destina-
              tion_rate_delay  parameter  value,  where  transport is the mas-
              ter.cf name of the message delivery transport.

       Available in Postfix version 3.1 and later:

       default_transport_rate_delay (0s)
              The default amount of delay that is inserted between  individual
              message  deliveries  over  the  same message delivery transport,
              regardless of destination.

       transport_transport_rate_delay ($default_transport_rate_delay)
              A   transport-specific   override   for    the    default_trans-
              port_rate_delay  parameter value, where the initial transport in
              the parameter name is the master.cf name of the message delivery
              transport.

SAFETY CONTROLS
       qmgr_daemon_timeout (1000s)
              How much time a Postfix queue manager process may take to handle
              a request before it is terminated by a built-in watchdog  timer.

       qmgr_ipc_timeout (60s)
              The time limit for the queue manager to send or receive informa-
              tion over an internal communication channel.

       Available in Postfix version 3.1 and later:

       address_verify_pending_request_limit (see 'postconf -d' output)
              A safety limit that prevents address verification requests  from
              overwhelming the Postfix queue.

MISCELLANEOUS CONTROLS
       config_directory (see 'postconf -d' output)
              The  default  location of the Postfix main.cf and master.cf con-
              figuration files.

       defer_transports (empty)
              The names of message delivery transports that should not deliver
              mail unless someone issues "sendmail -q" or equivalent.

       delay_logging_resolution_limit (2)
              The  maximal  number of digits after the decimal point when log-
              ging sub-second delay values.

       helpful_warnings (yes)
              Log warnings about problematic configuration settings, and  pro-
              vide helpful suggestions.

       process_id (read-only)
              The process ID of a Postfix command or daemon process.

       process_name (read-only)
              The process name of a Postfix command or daemon process.

       queue_directory (see 'postconf -d' output)
              The location of the Postfix top-level queue directory.

       syslog_facility (mail)
              The syslog facility of Postfix logging.

       syslog_name (see 'postconf -d' output)
              A  prefix  that  is  prepended  to  the  process  name in syslog
              records, so that, for example, "smtpd" becomes "prefix/smtpd".

       Available in Postfix version 3.0 and later:

       confirm_delay_cleared (no)
              After sending a "your message is delayed"  notification,  inform
              the sender when the delay clears up.

       Available in Postfix 3.3 and later:

       service_name (read-only)
              The master.cf service name of a Postfix daemon process.

       Available in Postfix 3.5 and later:

       info_log_address_format (external)
              The  email  address  form that will be used in non-debug logging
              (info, warning, etc.).

FILES
       /var/spool/postfix/incoming, incoming queue
       /var/spool/postfix/active, active queue
       /var/spool/postfix/deferred, deferred queue
       /var/spool/postfix/bounce, non-delivery status
       /var/spool/postfix/defer, non-delivery status
       /var/spool/postfix/trace, delivery status

SEE ALSO
       trivial-rewrite(8), address routing
       bounce(8), delivery status reports
       postconf(5), configuration parameters
       master(5), generic daemon options
       master(8), process manager
       postlogd(8), Postfix logging
       syslogd(8), system logging

README FILES
       SCHEDULER_README, scheduling algorithm
       QSHAPE_README, Postfix queue analysis

LICENSE
       The Secure Mailer license must be distributed with this software.

AUTHOR(S)
       Wietse Venema
       IBM T.J. Watson Research
       P.O. Box 704
       Yorktown Heights, NY 10598, USA

       Preemptive scheduler enhancements:
       Patrik Rak
       Modra 6
       155 00, Prague, Czech Republic

       Wietse Venema
       Google, Inc.
       111 8th Avenue
       New York, NY 10011, USA

                                                                       QMGR(8)